Weinert Roofing & Maintenance has been installing asphalt shingle roofs across Weinert for 22 years. GAF Timberline HDZ, Owens Corning Duration, CertainTeed Landmark — we carry the top shingle lines and we're certified by the manufacturers to install them.
We install every shingle roof to manufacturer specifications. That means 4-6 nails per shingle in the designated nailing zone, proper offset between courses, starter strips along the eave, and ridge cap shingles at every hip and ridge. When the manufacturer inspector shows up, your roof passes.
Our Shingle Roofing Process
Consultation & Inspection
Free on-site inspection. We measure, assess your roof deck condition, and walk you through architectural vs. three-tab shingles with realistic pricing. No pressure, just facts.
Tear-Off & Deck Prep
We strip the old shingles, underlayment, and damaged flashing down to the roof deck. Every square foot of OSB or plywood sheathing inspected for rot, water damage, and soft spots. Compromised decking replaced before new materials go down.
Underlayment & Flashing
Synthetic underlayment across the full roof deck. Ice-and-water shield in valleys, along eaves, and around chimney flashing, pipe boots, and vent boots. New drip edge installed at every eave and rake. Step flashing and counter-flashing at all wall transitions.
Shingle Installation
Field shingles installed with proper exposure and overlap. Nailed per manufacturer specs — 4 nails standard, 6 in high-wind zones. Starter strips at the eave prevent wind uplift. Ridge cap shingles finish every peak with integrated ridge vent for ventilation.
What Weinert Customers Say
"We called expecting to wait days, but they were here the same afternoon. Fair pricing, quality work, and they kept us informed every step of the way."
"From the first phone call to the final walkthrough, everything was seamless. The team was courteous and efficient. Already recommended them to two friends."
"Responded fast and got the job done right the first time. Crew was polite, professional, and cleaned up everything. Would absolutely hire again."
Why Choose Weinert Roofing & Maintenance for Shingle Roofing?
Proper Flashing at Every Penetration
Chimney flashing, step flashing, pipe boots, vent boots, valley channels — every transition sealed with waterproof sealant and proper overlap. Flashing failures cause 90% of roof leaks.
Manufacturer-Certified Installers
GAF Master Elite, Owens Corning Preferred, CertainTeed SELECT ShingleMaster. Our certifications mean your manufacturer warranty is fully valid from day one.
Nailed to Manufacturer Spec
Every shingle nailed in the designated nailing zone with the correct number of fasteners. This is what keeps the manufacturer warranty valid and the shingles on your roof in high wind.
Ice-and-Water Shield Standard
Every shingle roof includes ice-and-water shield at valleys, eaves, and around penetrations. This self-adhering membrane is the last line of defense against water intrusion if a shingle fails.